Polishing abrasive belt polishing machine
I believe that many factories use certainly for the abrasive belt polishing machine has been for a long time, do not know whether you understand it? Whether the effect of abrasive belt polishing machine satisfied? A belt polishing machine substitute not found? At present, the role of abrasive belt polishing machine is not a substitute for the, in the production of fine processing of polishing processing equipment, abrasive belt polishing machine can be said to be the main hero.
Automatic sand polishing machine is an irreplaceable polishing treatment equipment industry, fine processing, polishing is the material in the medium surface micro convex part of the concave preferential, resulting in smooth surface dissolution. The main advantage of this method is that it does not require complex equipment, and can be associated with the shape of complex parts of Poland, but also can be polished workpiece, high efficiency. The core issue is to prepare slurry polishing. Surface polishing of the roughness of 10 mu m. And then polished should pay attention to what? What should be done?
Abrasive belt polishing, also need to perform the following steps:
1 workpiece transfer: after polishing, the work should be quickly transferred to the water tank cleaning. If there is no rapid transfer, there will be a transmission of defects in the corrosion. Because polishing bath attached to the workpiece is usually more viscous, working out the continuation of the reactor,, gases are released, acidity decreased quickly, increase the amount of dissolved metal ions on the surface of a liquid., more and more deviates from the polishing process, polishing condition normal, does not occur on the surface, formation occurred only corrosion defects.
2 ash: a number of materials, such as aluminum and aluminum alloy polishing cleaning should be carried out to eliminate the process of volcanic ash. Workpiece surface dust, surface quality needs to be checked for polishing and ash is sufficient, if not meet the requirements, should be timely rework process.
3 wash: the role of the residual liquid in the workpiece surface cleaning every process, to avoid the solution of residual liquid into the next process caused by pollution, but also to avoid the residual liquid to continue on the surface. Cleaning with air agitation is necessary; if the frame up and down moving, the workpiece repeat method of cleaning with warm water washing; circulation flow, better effect. It is mainly used for sanitary fittings, hardware fittings, lock accessories, fine processing, mobile phone shell, mobile phone shell, digital camera accessories, cosmetic accessories is an important industry in the production and processing of polishing equipment, but in daily use, in order to correct operation precision polishing machine, otherwise it will shorten the service life of the polishing agent.
The above is about the role of West Lake card belt polishing machine for polishing articles, as well as on the number of polishing after treatment.