The disposal of abnormal condition of abrasive belt polishing machine
Abrasive belt polishing machine grinding product brightness difference may be the following problems: product center height is too low (with high gasket or cylindrical pin pad); abrasive belt polishing machine products grinding wheel is too short; too much vibration (with adjustable static balance wheel balance frame) poor quality of the machine tool guide (fix. After the appearance of lubrication, average pore texture, cutting machine); whether there is oil or liquid has changed.
Abrasive belt polishing machine showed abnormal situation handling:
A, when the abrasive belt polishing machine normal processing demand to suspend the program, should be close to 0 slow rate switch.
B, when the onset of an emergency situation, should quickly suspend procedures, if necessary using the emergency stop button belt polishing machine.
C, when the alarm and stop because of abrasive belt polishing machine Taiwan, should first remove the alarm information, and then immediately removed from the safe processing position of spindle. To clean out the alarm.