The use of belt machine instructions
Abrasive belt machine is grinding and polishing tool industry wide application scope, today to talk about how to use:
1, the installation of belt
The handle is pulled out, the belt is installed in the front and rear wheel, and then put the handle back position. Note: the installation of belt is confirmed to be consistent with the direction of the arrow on the back of the belt and the tool.
2, adjust the belt track
Tools to open the power switch; belt to rotate, by adjusting the handle to enable abrasive belt trajectory of center is, not according to the processing, will lead to scrape on the edge of the belt.
3, the installation of dust bag
The steel wire portion of the dust collection bag is placed in the installation position of the dust collector.
4, switch operation
Starting with this tool, you can pull the trigger. Pull the trigger, the tool stops rotating. To make continuous rotation, press the trigger button to press the lock button. Then pull the trigger, and then relax, you can eliminate the continuous rotation.
5, the operation of belt machine
The abrasive belt surface to be polished and kept parallel, the tool moves back and forth. Hold the hand wheel and the handle in front.
Note: do not force pressure belt machine. Weight of the tool will exert proper pressure, the pressure will cause motor stall, overheating, burn the workpiece and the rebound.
Because of many kinds of styles of belt machine, mode of operation is not all the same, if you have any questions please contact customer service!